Model CVX050-477 new in opened box. Was purchased for a project that fell through. Includes instruction manual, 3/4' chase nipple and locknut.

Price Includes shipping to anywhere in the continental U.S. Please include full shipping address with your reply or text Tony at (208) 681 8442

ONLINE AUCTION- Ends 3/30/17. To see full details for this item please go to www.govdeals.com and enter QAL #1925-395 in the Quick Asset Lookup QAL box located on the home page. 

Used Conventional and Pad Mount Transformers, KVA's range from 1.5 to 750. These Transformers, Breaker and Regulators are not in working conditions. Oil has been drained out of most transformers, but can be re-built. Oil has been drained out of some of the regulators, not in working condition but can be re-built. Some regulators that contain oil can be put back into service. Please Note, Pad Mount Transformer, 300 KVA with serial #21900-0789 can NOT be re-built, it has been hit. The City of Martinsville will load these transformers, breakers and regulators onto your vehicle with our tow motor and line truck. The successful bidder will sign a release form stating they release the City of Martinsville from liability and responsibility for any damages to their vehicle or injuries to any persons incurred during the loading of these transformers, breakers and regulators. The successful vendor will be required to provide a large enough vehicle for transporting these transformers, breaker and regulators in one pick-up. More information and list of items available on auction page. 

ONLINE AUCTION. Ends 3.1.17 . To view full details, please go to www.govdeals.com and enter 297-1723 in the QAL (Quick Asset Lookup) search box located on the homepage. AUCTION INCLUDES ALL SQUARE D EQUIPMENT INSIDE BUILDING INCLUDING SQUARE D MOTOR CONTROL CENTER (MCC) MODEL 6 IS 600 AMP RATED AS DESCRIBED BELOW & SHOWN IN PHOTOS:

The main disconnect outside has no cover so most likely not in good condition. • inside fused disconnect is at least a 3 phase 480 volt but probably 600 volt rated (currently has 225 amp fuses installed) • the Sq D transformer is 25KVA rated, cat# 25S3HFCU • the Sq D panel is a NQOD30L225CU with a few breakers installed • Looks like possibly a Sq D lighting contactor above door • the Sq D MCC (Motor Control Center) is 600 amp rated, with 5 sections. Some buckets are labeled spare but the rest used to be active, please see the picture of #2 seepage bucket (opened), it has associated parts still installed. Other buckets are labeled, see below: - Seepage Pump P-1 Control Panel - 120 V Control for RVSS P-1 - Transformer - Surge Suppressor - Seepage Pump No.1 - Remote Control Panel - 120 V Control for RVSS P-2 - Seepage Pump No.2 - Metering - MCB (main circuit breaker)

BUYER MUST REMOVE/DISCONNECT ALL SQUARE D EQUIPMENT INSIDE BUILDING. PROVIDE EQUIPMENT TO LOAD SUCH AS HOIST, GANTRY CRANE, FORKLIFT, ETC. UNPAVED ACCESS ROAD. PICK UP ONLY MONDAY THRU THURSDAY BETWEEN 8:00AM & 4:00PM.

LIABILITY RELEASE MUST BE SIGNED AND PROOF OF INSURANCE IS REQUIRED: $300,000 GENERAL LIABILITY, $300,000 AUTO AND WORKERS COMP. MUST NAME THE S FL WATER MANAGEMENT DISTRICT AS ADDITIONAL INSURED. SEE G350A Equipment Removal Requirements Draft.docx ATTACHMENT FOR FURTHER DETAILS.

LOCATED REMOTE SITE G350A IN HENDRY COUNTY (DOWN A SHORT WAY FROM G508 WHICH IS ADDRESS LISTED WITH THIS POSTING). SEE PHOTO OF ACTUAL BUILDING ITEMS LOCATED IN. NO FACILITIES. BEWARE OF POTENTIAL WASPS.

PROPERTY MAY BE INSPECTED ON WEDNESDAY, FEBRUARY 1ST AT 9:00 AM. BY SCHEDULED APPOINTMENT ONLY! Please contact: Karen Kempf, Phone: (561) 682-2113 or e-mail: kkempf@sfwmd.gov

CONDITION: EQUIPMENT HAS NOT BEEN TESTED AND MOST ITEMS FOR SALE ARE USED AND MAY CONTAIN DEFECTS NOT IMMEDIATELY DETECTABLE. ALL EQUIPMENT ARE SOLD IN "AS-IS" CONDITION. WE STRONGLY RECOMMEND YOU INSPECT EQUIPMENT BEFORE BIDDING!

ONLINE AUCTION- Ends 2/20/17. To see full details for this item please go to www.auctiondeals.com enter QAL #9595-7 in the Quick Asset Lookup QAL box located on the home page.

Generac Transfer switch. Model 93A01593-W. Serial #21190.

Taken out from Dr.s office.

Measures 36" x24" x10"

Has not been tested, came out of working unit 120/240 volts Max amps 105 Max volts 250 

Product Features
1.  5.7inch LCD screen display.
2.  Full functions, satisfy all kinds of CT(protection CT, measuring CT, TP) test requirements, such as excitation characteristic test, turn ratio, polarity, secondary winding resistance, secondary burden, ratio error, angular difference and etc. Also it can be used to test excitation characteristic, turn ratio, polarity, secondary winding resistance,ratio error, angular difference and etc all kinds of PT.
3.  More efficient to test CT, no need to use standard CT, primary current injection device, load case, voltage   regulation control and high current lead to verify the CT.
4.  Meets IEC60044-1, IEC60044-6 standards of all kinds of CT/PT.
5.  Accurately measure ratio error and angular error. Max. Ratio error ±0.05% is permitted. Max. Angular error ±2min if permitted. It can measure 0.2S class CT and turns ratio range is 1-35000.
6.  Auto test CT/PT parameters on knee point voltage/current, 5% and 10% deviation curve measurement,  Accuracy limit factor (ALF), safety factor (FS), second time constants (Ts), residual magnetism factor(Kr),  saturated and unsaturated inductance.
7.  Using variable frequency method to test VA curves and 10% error curve of CT/TP. Max. Output is 180V and 5A rms(15A peak value), but it can make CT test when keen point is up to 60kV.
8.  Easy to use. To test CT DC resistance, excitation and polarity only by one button. All CT tests adopt same     one connect method except load test.
9.  Storage 1000 groups data, data can be saved even power down. Equipped with micro printer to print test result after testing completed.
10. Test results can be download by USB disk.
11.  Small size, weight is no more than 10kg, suitable for on-site use.

 Allen-Bradley PowerFlex 7000 Air-Cooled Drive Unit & Components - 

Allen-Bradley PowerFlex 7000 Power Supply Components: Air-Cooled Drive Unit & Components contained in 10 cabinets on pallets weighing approximately 35,000 lbs. total weight
New components that have never been used and are in excellent condition.
Description Details:
Capabilities Across a Broad Range of Applications
The PowerFlex 7000 drive is a flexible, easy-to-use solution designed to meet diverse application requirements across a wide spectrum of heavy industrial settings.
Controls speed, torque and direction of induction or synchronous AC motors, normal duty or heavy duty.
Broad power range: 150 kW to 25,400 kW (200 Hp to 34,000 Hp)
Achieves near unity power factor throughout the typical operating speed range for variable torque loads
Virtually perfect sinusoidal current and voltage waveforms allow use of standard motors
Accommodates motor cable lengths up to 15 km
EtherNet/IP™ communication interface. Optional interfaces for a variety of network protocols
Drive control: Sensorless vector control or full vector control with tachometer feedback (optional)
Flexible input configurations: Direct-to-Drive (transformerless), Active Front End (AFE) rectifier or 18-pulse rectifier
Patented PowerCage™ allows SGCT replacement in less than ten minutes
Achieve requirements for Safety Integrity Level 3 (SIL 3) and Performance Level e (PL e) with TÜV Certified Safe Torque Off Premier Integration into the Logix control platform with Studio 5000 Logix Designer™ software reduces development and integration time Robust Design -- PowerFlex 7000 higher power drive structures are designed to help contain and redirect energy in the event of an incident with enhanced enclosures and fault containment. Help reduce downtime with built-in diagnostic and detection features that monitor the health of drive components. Synchronous bypass and transfer to control multiple motor systems • Local and remotely mounted HMI options.Remote Virtual Support Engineer™ service available
CATALOG NUMBERS OF MAJOR COMPONENTS:
1.  Two-High, Full Voltage Non-Reversing Starters:
1512B-AAE-1ESTP-1STR-1STP-3L-5OFFG-5RUNR-6-6T-84D284HX-88GA-750RL-802-4010-5025D-CMOD[7,10,13]
2.  Two-High, Full-Voltage transformer Feeder Unit:
1512BT-AAE-1ON-1OFF-5OFFG-50NR-6-7F-89CF40-750RL-802-3950S-4010-CMOD[10]
3.  Empty/Auxiliary Unit:
1599-AAE
4.  Two-High, Full-Voltage Non-Reversing Starter:
1512B-AAE-1ESTP-1STR-1STP-3L-5OFFG-5RUNR-6-6T-84D2-84HX-88GA-750RL-802-4010-5025D-CMOD7
5.  Miscellaneous/Empty Unit:
1599-CAE-CMOD9
1-High VFD Input Contactor units:
1512AD-CAE-5OFFG-50NR-6B-6T-14LRD--84D2-84HX-88GA-750RL-4010-5051-CMOD[7]
6.  Medium Voltage, Air Cooled, Variable Frequency AC Drive Unit:
7000-E430DEBD-RPDTD-1EDSTP-1STR-1STR-1STP-3LL-4DRNR-4DRYG-4FLTR-4WRNA-13COMME-14PVKLC-14TS1-14TS3-14TS4-14TS5-17-8
Please call us with any questions or if you have an interest and would like additional photos of the equipment .                                                                                                                                                   ALL OFFERS WILL BE CONSIDERED        Office:1-888-322-9609 Cell:1-208-651-3736

New General Electric Rectifier Bay model GPS-4848/100
Catalog Number ED83142-30 G24. 
GPS 4848/100
Overview The Galaxy Power System (GPS) 4848/100 provides -48 volt telecommunications powering solutions in worldwide markets. The GPS 4848/100 combines 220 and 200-ampere, fan-cooled, switchmode rectifiers, microprocessor control technologies, battery and load disconnect/reconnect options, and a comprehensive line of fuse and circuit breaker dc distribution options in a modular front-access design. This modularity ensures easy access, simplified installation and maintenance, and allows the system to expand in capacity and features as power needs grow.
With 14,080-ampere maximum capacity, distribution flexibility, and universal ac input capability, the GPS 4848/100 supports switching, transmission, and wireless applications in central office locations and environmentally controlled remote sites (huts or vaults). For centralized architecture, bus bars are available to 14,080A.
ALL OFFERS CONSIDERED. GIVE US A CALL FOR MORE PHOTOS OR WITH QUESTIONS

888-322-9609

We have 22,000 sqft of electrical supplies and lighting fixtures and parts.

I will get some photos up very soon.

Hard to find breakers, panels, fittings, lugs, ballast, lighting fixtures, pipe, light bulbs, pull boxes and much more.

Call Rob 908-756-4181 mon-fri 8:30 till 4:30 pm

Thanks

We recenlty purchased of a Lot, and enclosed was 12 GE Transformers Single Phase. We are extremely motivated to sell them! Please feel free to contact me if you have any questions, and hope to hear from you soon, All The Best, Gary 323-891-5723  

Please see attached PDF with product information and specs. Thank you

PAD Mounted transformer radial or loop feed

15kVA up to 3000kVA three phase

manufactured according to ANSI C57 standard

submersible transformer radial or loop feed

5kVA up 150kVA single phase submersible transformer

voltages 13,200/7620YT , 22860/13200YT, 34500/22860TY

240/120V 60Hz or 50Hz

pad mounted transformer ONAN type

5kVA up to 3000kVA and operating voltages

up to 34.5kV

Enertech India one of the leading MPPT solar inverter manufacturers offers solar off grid inverters to provide conditioned AC power to its customers.

Get more information at http://www.enertechups.com/product-solar-pcu-solar-inverter.html

We have a brand new, never used Battery Charger Module for an MGE Comet 50 to150 KVA Series Uninterruptible Power Supply (UPS) Battery Backups. Part # 72-164007-03 This Battery Charging Module is a Rev Level 3, meaning that the heat sink and the on board Fan have been modified and over sized by the MGE Factory to prevent over heating issues from previous Revisions in the past. This Module is new, the customer we purchased it for decided to purchase a larger UPS System to accommodate for future growth in their Data Center. To purchase this Battery Charger Directly from MGE would cost you $2050.00 and we are offering ours today for $1550.00 with Free Shipping.